Excellent Quality 1.4501/S32760 Super Duplex Stainless Steel Plate Stainless Flat Sheet Electroplated Stainless Steel 5mm Stainless Steel Plate

• Customization: Available
• Type: Stainless Steel Sheets
• Standard: ASTM, AISI
• Model NO.: S32760
• Certification: ISO
• Shape: Flat
• Technique: Cold Rolled
• Surface Treatment: Bright
• Special Use: Cutting Tools
• Application: Mold & Dies
• Product Name: Q235 Black Steel Sheet Carbon Plate Sheet Hot Roll
• Delivery Term: Fob, CIF, CFR, Exwork, etc
• Thickness: 0.4-20mm
• Payment Term: T/T, L/C
• Delivery Condition: Hot Rolled, Forged, Annealed
• Shipping: by Sea, Air
• Material: 200 Series/300 Series/400
• MOQ: Quantity Kg Ton
• Quantity Kg Ton: Seaworthy Packing
• Length: 6m or as Required
• Types: Plates, Rods, Sheets
• Transport Package: Standard Sea-Worthy Packing
• Specification: as required
• Trademark: bolaisheng
• Origin: China

Product Description

Product Description

Excellent Quality 1.4501/S32760 Super Duplex Stainless steel plate
 

1.Product Description

F55 S32760 stainless steel plate
EN 1.4462 - 329 is a high alloy austenitic stainless steel with low carbon content. The grade is intended for use under severe corrosive conditions. The steel grade was originally developed to resist corrosion in dilute sulphuric acid. EN 1.4462 is fully austenitic, and is less sensitive to precipitation of ferrite and sigma phase than conventional austenitic grades with high molybdenum content. Due to the combination of relatively high contents of chromium, nickel, molybdenum and copper,   EN 1.4462 has good resistance to general corrosion, particulary in dilute sulphuric acid.  It is non-magnetic in the annealed condition but may become slightly magnetic as a result of cold-working or welding.
Design features  
⇒ Good resistance to uniform corrosion
⇒ Good resistance to pitting and crevice corrosion  
⇒ Very good resistance to stress corrosion cracking
⇒ Good resistance to intercrystalline corrosion
⇒ Good formability and weldability
Corrosion resistance  
Uniform corrosion Uniform corrosion is characterized by a uniform corrosion of the steel surface in contact with the corrosive medium. Resistance is normally considered good if the corrosion rate is less than 0,1 mm/year. As a result of its high chromium, nickel and molybdenum contents and its alloying with copper, EN 1.4462 is passivated even in reducing environments such as dilute sulphuric acid and formic acid. Its high nickel content contributes towards its relatively low corrosion rate in the active state.  
Intercrystalline corrosion  
EN 1.4462 has a very low carbon content. This means that there is very little risk of carbide precipitation in connection with ordinary heat treatment and welding. The risk of intercrystalline corrosion after ordinary heat treatment and welding is thereby eliminated.
 

Stainless steel sheet surface finish characteristics
 

2B	The surface brightness and flatness of no2B is better than no2D. then through a special surface treatment to improve its mechanical properties,No2B could nearly satisfy comprehensive uses.
No.1	Polished with abrasive belt of grit#100-#200, have better brightness with discontinuous coarse stria, used as inner and external ornaments for building, electrical appliances and kitchen utensils etc
No.4	Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous coarse stria, but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc.
HL	Polished with abrasive belt of grit #150-#320 on the NO.4 finish and has continuous streaks, mainly used as buildings ornaments elevators, door of building, frontal plate etc.
BA	Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror, kitchen apparatus, ornament etc.
8K	The product have excellent brightness and prefer reflexivity can to be the mirror.

 
Stainless steel maintenance:
(1) Regular cleaning and maintenance
 
(2) Pay attention to prevent the occurrence of the phenomenon of surface scratches
(3) Use soap, weak detergent or warm water to remove surface dust, dirt
(4) In addition to the surface of the binder with alcohol or an organic solvent (ether, benzene)
(5) Use neutral detergent or ammonia solution in addition to surface oil

Packings 
 

Grade	C	Si	Mn	P	S	Ni	Cr
AISI 201	<=0.15	<=1.00	5.5-7.5	<=0.060	<=0.03	<=3.50-5.50	<=16.00-18.00
AISI 202	<=0.15	<=1.00	7.5-10.0	<=0.060	<=0.03	<=4.0-6.0	<=17.00-19.00
AISI 304	<=0.07	<=1.00	<=2.00	<=0.045	<=0.03	<=8.00-10.5	<=18.00-20.00
AISI 316L	<=0.03	<=1.00	<=2.00	<=0.045	<=0.03	<=12.00-15.00	<=16.00-18.00
AISI 309S	<=0.08	<=1.00	<=2.0	<=0.045	<=0.03	<=12.00-15.00	<=22.00-24.00
AISI 310S	<=0.08	<=1.00	<=2.00	<=0.045	<=0.03	<=19.00-22.00	<=24.00-26.00
AISI 321	<=0.08	<=1.00	<=2.00	<=0.045	<=0.03	<=9.00-13.00	<=17.00-19.00
AISI 409L	<=0.08	<=1.00	<=1.00	<=0.045	<=0.03	<=0.50	<=10.50-17.50
AISI 430	<=0.12	<=0.75	<=1.00	<=0.040	<=0.03	<=0.60	<=16.00-18.00
AISI 436L	<=0.025						<=16.00-19.00
AISI 439	<=0.03	<=1.00	<=1.00	<=0.040	<=0.03	<=0.50	<=17.00-19.00
AISI 441	<=0.015	<=1.00	<=1.00	<=0.040	<=0.03	<=0.30	<=17.50-19.00
AISI 444	<=0.025	<=1.00	<=1.00	<=0.040	<=0.03	<=1.00	<=17.50-19.50

                                                              
                                                        Mechanical property

	YIELD STRENGTH	TENSILE STRENGTH	EXTENSION	HARDNESS
	N/mm2	N/mm2	%	HRB	HV	HB
AISI 201	>=270	>=520	>=40	<=100	<=253	<=241
AISI 202	>=245	>=590	>=40	<=95	<=218	<=207
AISI 304	>=205	>=520	>=40	<=90	<=200	<=187
AISI 316L	>=175	>=480	>=40	<=90	<=200	<=187
AISI 309S	>=205	>=520	>=40	<=90	<=200	<=187
AISI 310S	>= 205	>=520	>=40	<=90	<=200	<=187
AISI 321	>=205	>=520	>=40	<=90	<=200	<=187
AISI 409L	>=175	>=360	>=25	<=80	<=175	<=162
AISI 430	>=205	>=450	>=22	<=88	<=200	<=183
AISI 439	>=245	>=410	>=20	<=96	<=230	<=217
AISI 441	>=302	>=495	>=35	<=96	<=170	<=217
AISI 444	>=245	>=410	>=20	<=96	<=230	<=217

 

 

Our Advantages

Qualitative Materials:

We utilize top-grade raw materials to ensure unparalleled product strength, resilience, and longevity.

Advanced Technology:

Our manufacturing processes feature cutting-edge technology, including advanced smelting, continuous casting, and rolling techniques.

Customized Service:

We offer tailored design and manufacturing solutions to meet each customer's unique needs and requirements.

FAQ

Q1: Why choose your company?

A: With over 16 years of industry expertise and our own factory, we deliver exceptional services through our professional and dedicated sales team.

Q2: What are your terms of payment?

A: We require a 30% T/T upfront deposit, with the remaining 70% payable before delivery.

Q3: What are your delivery terms?

A: Our delivery terms include FOB, CFR, CIF, and EXW.

Q4: What is your delivery time?

A: Our standard lead time is 7 to 15 days after receiving the deposit.

Q5: Can you provide samples?

A: Yes, we offer complimentary samples if available in stock; however, the transportation fee is the buyer's responsibility.

Certification