| Customization: | Available |
|---|---|
| Type: | Alloy Steel Pipe |
| Standard: | AISI, ASTM, DIN, GB |
|
Still deciding? Get samples of US$ 15/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Manufacturing process does not contain or less aluminum, titanium superalloy, generally using electric arc furnace or non-vacuum induction furnace smelting. When the superalloy containing aluminum and titanium is smelted in the atmosphere, the element burning loss is not easy to control, and the gas and inclusions enter more, so vacuum smelting should be used. In order to further reduce the content of inclusions, improve the distribution state of inclusions and the crystal structure of ingot, the double process combining smelting and secondary remelting can be adopted. The main means of smelting are electric arc furnace, vacuum induction furnace and non-vacuum induction furnace. The main means of remelting are vacuum consumable furnace and electroslag furnace.
Solid solution strengthened alloy and alloy ingot containing low aluminum and titanium (the total amount of aluminum and titanium is less than 4.5%) can be forged. Alloys containing aluminum and titanium are generally opened by extrusion or rolling, and then hot rolled, and some products need to be further cold rolled or cold drawn. Large diameter alloy ingot or cake must be forged by hydraulic press or fast forging hydraulic press.
Alloys with a high degree of alloying and not easy to deform are currently widely used in precision casting molding, such as casting turbine blades and guide blades. In order to reduce or eliminate grain boundaries perpendicular to the stress axis and reduce or eliminate porosity in cast alloys, directional crystallization processes have been developed in recent years. In this process, the grains grow along one crystal direction during the solidification of the alloy to obtain parallel columnar crystals without transverse grain boundaries. The primary process conditions for achieving directional crystallization are to establish and maintain a sufficiently large axial temperature gradient and good axial heat dissipation conditions between the liquidus and the solid phase lines (see solidification of metals). In addition, in order to eliminate all grain boundaries, the manufacturing process of single crystal blades has been studied in recent years.
Product Parameter
| Product Name | GH1015 GH1016 GH1035 GH1040 H10150 H10160 H10350 H10400 Superalloy Tube |
| Material | Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy |
| Shape | Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet |
| Grade | Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L |
| Others: 253Ma,254SMo,654SMo,F50(UNS S32100)F60,F61,F65,1J22,N4,N6 etc | |
| Alloy : Alloy 20/28/31; | |
| Hastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g; | |
| Haynes: Haynes 230/556/188; | |
| Inconel Series:Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20; | |
| Incoloy: Incoloy 800/800H/800HT/825/925/926; | |
| GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044 | |
| Monel: Monel 400/K500/R405 | |
| Nitronic: Nitronic 40/50/60; | |
| Nimonic: Nimonic 75/80A/90/A263 ; | |
| Specification | Wire: 0.01-10mmStrip: 0.05*5.0-5.0*250mm Bar: φ4-50mm;Length 2000-5000mmPipe: φ6-273mm;δ1-30mm;Length 1000-8000mmSheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm |
| Product Characteristics | 1.According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys.2.According to the strengthening mode, there are solid solution strengthening type, precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc.. |
| Inspection | ISO,SGS,BV and so on. |
| Application | High temperature components such as turbine blades, guide vanes, turbine disks, high pressure compressor disks,machine manufacturingand combustion chambers used in the manufacture of aviation, naval and industrial gas turbines |
| Packaging | 1. cases packed in wooden cases2. paper packaging3. plastic packing4. foam packagingPackaging according to customer requirements or products |
| Delivery | 7-25days or according to the product |
| Payment | T/T,Western Union,MoneyGram,According to customer requirements paymentsfor offline orders. |
Our Advantages
Qualitative Materials:
We use top-grade raw materials to ensure our products offer unparalleled strength, durability, and longevity.
Advanced Technology:
Our manufacturing leverages state-of-the-art technologies, including advanced smelting, continuous casting, and precision rolling techniques.
Customized Service:
We provide bespoke design and manufacturing services to cater to the unique needs and specifications of our clients.
FAQ
Q1: Why choose your company?
A: With over 16 years of unmatched industry experience and the advantage of our cutting-edge factory, we offer exceptional services supported by our professional and dedicated sales team.
Q2: What are your terms of payment?
A: A 30% T/T deposit is required upfront, with the remaining 70% payable before delivery.
Q3: What are your delivery terms?
A: Our comprehensive terms of trade include FOB, CFR, CIF, and EXW, ensuring flexibility and convenience for our valued customers.
Q4: What is your delivery time?
A: Our standard lead time is impressively swift, typically ranging from 7 to 15 days upon receipt of the deposit, enabling prompt and efficient order fulfillment.
Q5: Can you provide samples?
A: Yes, we proudly offer complimentary samples subject to stock availability. Please note that transportation fees are the responsibility of the buyer.
Certification
){kind=link}