Customization: | Available |
---|---|
Application: | Transportation Tools, Door & Window, Glass Wall, Heat Sink, Decorations, Industrial |
Shape: | Round |
Still deciding? Get samples of US$ 500/Ton
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product Description
2A12(LY12-CZ) is a typical hard aluminum alloy in the ALCuMg system of Al-Cu-Mg, which can be strengthened by heat treatment with reasonable composition and good comprehensive properties. It is the largest amount of duralumin. The alloy is characterized by high strength, certain heat resistance, and can be used as working parts below 150°C. At temperatures above 125°C, 2A12 alloys are stronger than 7075 alloys. The formability in hot state, annealing state and new quenching state is better, and the heat treatment strengthening effect is remarkable, but the heat treatment process is strict. The corrosion resistance is poor, but the coating with pure aluminum can be effectively protected: cracks are easy to occur when welding, but special processes can be welded and riveted.
Chemical Element Content (%)
Element | Fe | Si | Mn | Ni | Cu | Ti | Zn | Mg | More |
---|---|---|---|---|---|---|---|---|---|
Min |
- |
- |
0.3 |
- |
3.8 |
- |
- |
1.2 |
Al |
Max |
0.5 |
0.5 |
0.9 |
0.1 |
4.9 |
0.15 |
0.3 |
1.8 |
Mechanical properties
Xiangxiao Note: Longitudinal mechanical properties of rods at room temperature
Sample size: Rod diameter (square rod, hexagonal rod inscribed circle diameter) ≤ 22
Heat Treatment
(1) Homogenization annealing: heating to 480~495ºC; holding for 12~14h; furnace cooling.
(2) Complete annealing: heating to 390~430ºC; holding time 30~120min; furnace cooling to 300ºC and air cooling.
(3) Rapid annealing: heating at 350~370ºC; holding time at 30~120min; air cooling.
(4) Quenching and aging: quenching at 495~505ºC, water cooling; artificial aging at 185~195ºC, 6~12h, air cooling; natural aging: 96h at room temperature.
Detail Page
Product name |
2A12 Aluminum alloy pipe/square pipe |
|||
Standard |
ASTM DIN GB JIS EN |
|||
Surface state |
Smooth surface(H122, etc.) |
|||
Physical property |
Tensile strength σb (MPa) : ≥425,Elongation δ5 (%) ≥12, Yield strength:275 MPa, Hardness:120 HBW, Density:2.8 g/cm³, Fusing point:502-638ºC |
|||
Handling method |
1. Oxide layer appears on the surface of the alloy: the oxide layer can be removed by pickling or polishing and then anti-corrosion treatment. 2. The alloy strength does not meet the requirements: the strength of the alloy can be adjusted by heat treatment or cold working. 3. Cracks in the alloy: may be caused by defects in the material or excessive stress during processing, and reasonable process adjustment should be made. 4. The alloy surface is dented or scratched: the defects on the alloy surface can be repaired by polishing or spraying. |
|||
Typical uses |
Aircraft structures (skins, frames, rib-beams, spacers, etc.), rivets, missile components, truck wheels, screw elements and other structural parts. |
|||
Specification |
Thickness:.5-- 26mm Width: 8-- 28mm or as you requirement |
|||
Export Packing |
Standard Seaworthy Package |
Introduction
1. who are we?
Shanghai Bolaisheng Metal Group Co., Ltd was founded in 2022 with a registered capital of 50 million RMB. Located in Fengxian District, Shanghai. The predecessor of the company was established in Kunshan in 2008. In the past 16 years, the company has been committed to the development of domestic trade, and has established long-term good cooperative relations with dozens of well-known steel enterprises at home and abroad, such as Shanghai Baosteel, Liaoning Anshan Steel and so on. The annual sales volume reaches tens of thousands of tons, the sales volume exceeds 200 million yuan, the number of service customers is also increasing year by year. In the two-way choice beteen customers and suppliers, has accumulated more rich market experience, and has its own processing plant.
2. how can we guarantee quality?
In the past 16 years, the company has been committed to the development of domestic trade, and has established long-term good cooperative relations with dozens of well-known steel enterprises at home and abroad, such as Shanghai Baosteel, Liaoning Anshan Steel and so on. The annual sales volume reaches tens of thousands of tons, the sales volume exceeds 200 million yuan, the number of service customers is also increasing year by year. In the two-way choice between customers and suppliers, has accumulated more rich market experience, and has its own processing plant.
3.what can you buy from us?
stainless pipe, plate, metel
4. what services can we provide?
Accepted Delivery Terms: FOB, CFR, CIF, EXW;
Accepted Payment Currency: USD;
Accepted Payment Type: T/T,PayPal etc;
Language Spoken:English, Chinese
-We are a steel manufacturer with annual sales of hundreds of millions, with our own processing plant, which can meet customers' needs for steel and other products.
-We have been engaged in the business of metal materials for 16 years, and have accumulated a large number of raw material supplier channels. We have cooperated with many well-known domestic enterprises to provide customers with the high-quality steel they need and more favorable prices.
-If you are willing to cooperate with us or contact us further, we will be very grateful and look forward to receiving your reply.
Certification