Customization: | Available |
---|---|
Type: | Coil |
Standard: | AISI, ASTM, DIN, JIS, GB, BS |
Still deciding? Get samples of US$ 50/Ton
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product Description
Q195 has high plasticity, toughness and weldability, good pressure workability, but low strength.
Used in the manufacture of anchor bolts, share, smoke pipe, roof board, rivet, low carbon steel wire, sheet, welded pipe, tie rod, hook, bracket, welding structure, etc
This standard is intended for general delivery use and is generally used for welding, riveting and bolted hot-rolled steel plates, strips, sections and rods for engineering structures
Brand suffix letters: A, B, C, D indicates the quality level
Boiling steel; Z-- killed steel; TZ- Special killing steel
In the brand composition representation, the Z and TZ symbols can be omitted
Chemical element content (%)
Element |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Cu |
As |
N |
Min |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
Max |
0.12 |
0.3 |
0.5 |
0.035 |
0.04 |
0.3 |
0.3 |
0.3 |
0.08 |
0.008 |
Physical properties
Thickness (diameter) |
Tensile strength |
Yield point |
Elongation or elongation after breaking |
Shock absorption energy |
t(d) |
σb |
σs |
δ |
KV2 |
mm |
Mpa |
Mpa |
% |
J |
≤16 |
315~430 |
≥195 |
≥33 |
- |
>16~40 |
315~430 |
≥185 |
≥33 |
- |
• For steel with a thickness greater than 100mm, the lower limit of tensile strength is allowed to be reduced by 20N/mm². Maximum tensile strength of wide strip steel (including shear steel plate) is not a condition of delivery. |
||||
• The test temperatures of shock absorption energy in the table are: +20°C; 0°C; -20°C |
||||
• The yield strength values for Q195 are for reference only and are not a condition of delivery |
Detail Page
Product Name |
carbon steel coil |
Thickness: |
0.15mm-300mm |
Width |
50mm-3500mm, |
Length |
1m-12m |
Material grade |
Q195-Q420,SS400-SS540 ,S235JR-S355JR, A36-A992 ,Gr50 Series. |
Standard |
AISI, ASTM, BS, DIN, GB, JIS |
Size Tolerance |
+/- 1%~3% |
Yield Strength |
250~600 MPa |
Tensile Strength |
350~800 MPa |
Packaging |
Standard imported packaging, or as required |
Certificate |
ISO,SGS,BV,etc |
Delivery terms |
FOB / CIF / CFR / DAP or discuss with us for other terms |
Introduction
1. who are we?
Shanghai Bolaisheng Metal Group Co., Ltd was founded in 2022 with a registered capital of 50 million RMB. Located in Fengxian District, Shanghai. The predecessor of the company was established in Kunshan in 2008. In the past 16 years, the company has been committed to the development of domestic trade, and has established long-term good cooperative relations with dozens of well-known steel enterprises at home and abroad, such as Shanghai Baosteel, Liaoning Anshan Steel and so on. The annual sales volume reaches tens of thousands of tons, the sales volume exceeds 200 million yuan, the number of service customers is also increasing year by year. In the two-way choice beteen customers and suppliers, has accumulated more rich market experience, and has its own processing plant.
2. how can we guarantee quality?
In the past 16 years, the company has been committed to the development of domestic trade, and has established long-term good cooperative relations with dozens of well-known steel enterprises at home and abroad, such as Shanghai Baosteel, Liaoning Anshan Steel and so on. The annual sales volume reaches tens of thousands of tons, the sales volume exceeds 200 million yuan, the number of service customers is also increasing year by year. In the two-way choice between customers and suppliers, has accumulated more rich market experience, and has its own processing plant.
3.what can you buy from us?
stainless pipe, plate, metel
4. what services can we provide?
Accepted Delivery Terms: FOB, CFR, CIF, EXW;
Accepted Payment Currency: USD;
Accepted Payment Type: T/T,PayPal etc;
Language Spoken:English, Chinese
We are a steel manufacturer with annual sales of hundreds of millions, with our own processing plant, which can meet customers' needs for steel and other products.
We have been engaged in the business of metal materials for 16 years, and have accumulated a large number of raw material supplier channels. We have cooperated with many well-known domestic enterprises to provide customers with the high-quality steel they need and more favorable prices.
If you are willing to cooperate with us or contact us further, we will be very grateful and look forward to receiving your reply.
Application
Used in the manufacture of anchor bolts, share, smoke pipe, roof board, rivet, low carbon steel wire, sheet, welded pipe, tie rod, hook, bracket, welding structure, etc. Rolling sheet and rod. Cold, hot rolled sheet steel and galvanized, tinned and plastic composite sheet steel made of the original plate are widely used in roof panels, decorative panels, general dust removal pipes, packaging containers, iron barrels, instrument shells, switch boxes, protective covers, train cars and so on. The wire rod is cold drawn into low carbon steel wire or galvanized into galvanized low carbon steel wire, which is used for binding, tensioning and fixing or used as wire mesh, rivets, etc.