| Customization: | Available |
|---|---|
| Shape: | Round |
| Application: | Transportation Tools, Door & Window, Glass Wall, Heat Sink, Decorations, Industrial |
|
Still deciding? Get samples of US$ 500/Ton
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Display
Detail Page
|
Product name |
EN AW-5305 5505 5605 5010 5110 5210 5310 5018 5019 Aluminum alloy bar/square bar |
|||
|
Standard |
GB/T3190-98T1/T2/T3/T4/T6/T8/T9/T351/T651/5754/7075/7005/7050/6061/6063/6082/2011/2024/2017/5052/5083, etc |
|||
|
Surface state |
Smooth surface(H122, etc.) |
|||
|
Physical property |
Tensile strength σb (MPa) : 472Elongation δ5 (%) ≥10, Yield strength:325 MPa, Hardness:120 HBW, Density:2.78 g/cm³, Fusing point:502-638ºC |
|||
|
Handling method |
1. Oxide layer appears on the surface of the alloy: the oxide layer can be removed by pickling or polishing and then anti-corrosion treatment. 2. The alloy strength does not meet the requirements: the strength of the alloy can be adjusted by heat treatment or cold working. 3. Cracks in the alloy: may be caused by defects in the material or excessive stress during processing, and reasonable process adjustment should be made. 4. The alloy surface is dented or scratched: the defects on the alloy surface can be repaired by polishing or spraying. |
|||
|
Typical uses |
2a12 aluminum alloy belongs to Al-Cu-Mg series aluminum alloy, main features and application: This is a kind of high strength duralumin, can be strengthened by heat treatment, in the quenching and hardening state of plasticity, spot welding is good, with gas welding has a tendency to form intercrystal cracks, the alloy after quenching and cold hardening its machinability is good, after annealing machinability is low: Corrosion resistance is not high, often using anodic oxidation treatment and painting method or surface coated with aluminum layer to improve its corrosion resistance. Mainly used for the production of various high-load parts and components (but not including stamping parts forgings) such as the skeleton parts on the aircraft, skin, frame, wing rib, wing beam, rivets and other working parts below 150ºC |
|||
|
Specification |
6-410 or as you requirement |
|||
|
Export Packing |
Standard Seaworthy Package |
|||
Packing
Introduction
1. who are we?
Shanghai Bolaisheng Metal Group Co., Ltd was founded in 2022 with a registered capital of 50 million RMB. Located in Fengxian District, Shanghai. The predecessor of the company was established in Kunshan in 2008. In the past 16 years, the company has been committed to the development of domestic trade, and has established long-term good cooperative relations with dozens of well-known steel enterprises at home and abroad, such as Shanghai Baosteel, Liaoning Anshan Steel and so on. The annual sales volume reaches tens of thousands of tons, the sales volume exceeds 200 million yuan, the number of service customers is also increasing year by year. In the two-way choice beteen customers and suppliers, has accumulated more rich market experience, and has its own processing plant.
2. how can we guarantee quality?
In the past 16 years, the company has been committed to the development of domestic trade, and has established long-term good cooperative relations with dozens of well-known steel enterprises at home and abroad, such as Shanghai Baosteel, Liaoning Anshan Steel and so on. The annual sales volume reaches tens of thousands of tons, the sales volume exceeds 200 million yuan, the number of service customers is also increasing year by year. In the two-way choice between customers and suppliers, has accumulated more rich market experience, and has its own processing plant.
3.what can you buy from us?
stainless pipe, plate, metel
4. what services can we provide?
Accepted Delivery Terms: FOB, CFR, CIF, EXW;
Accepted Payment Currency: USD;
Accepted Payment Type: T/T,PayPal etc;
Language Spoken:English, Chinese
We are a steel manufacturer with annual sales of hundreds of millions, with our own processing plant, which can meet customers' needs for steel and other products.
We have been engaged in the business of metal materials for 16 years, and have accumulated a large number of raw material supplier channels. We have cooperated with many well-known domestic enterprises to provide customers with the high-quality steel they need and more favorable prices.
If you are willing to cooperate with us or contact us further, we will be very grateful and look forward to receiving your reply.
){kind=link}